- Core Drilling Tools
Diamond Drill Rods, Casings, & Bits
SCX offers a complete range of top-quality, hard-wearing sampling equipment for even your most demanding diamond drilling applications.
Built in Miramichi, NB, our Canadian-made drill rods and casings are designed for durability, performance, and cost efficiency. Each rod is manufactured to the highest global standards, tested for reliability, and supported by a full range of components for core drilling.
We Stock Standard Lengths
1.5m/5ft & 3m/10ft
And Standard Diameters
B: 55.6mm / 2.19in
N: 69.9mm / 2.75in
H: 88.9mm / 3.5in
P: 114.3mm / 4.5in
Available Products
- RP621
Casing W/WT Threads - RP622
Standard Wireline Drill Rods - RP623
Standard T Wireline Drill Rods - RP625
Heavy-Duty Wireline Drill Rods
- RP630
Heavy-Duty Wireline Drill Rods – Lightweight - RP635
Wireline Drill Rods – Lightweight - RP640 R
Wireline Drill Rods - RP662 & RP663
TK Rods
Complete Support for
Diamond Core Drill Systems
- Drill Bits
- Rods
- Adapter Subs
- Casing Cutters
- Wireline Core Barrel B/N/N2/N3/P/P3 LW/H/H3
- Casing W/WT Threads
- Reaming shells
- Interchangeable core barrel systems and accessories
- Anti-Galling thread compound
- Casing Shoes
Wireline Drill Rods
RP622
Series Rods
The SCX RP622 series of drill rods features the industry standard modified ACME thread on the box and pin ends with the appropriate stand-off gap to ensure a tight seal.
Standard T Wireline Drill Rods
RP623
Series Rods
The SCX RP623 series of drill rods features a robust, modified square profile thread on the box and pin ends commonly referred to in the industry as “T”.
Lightweight Wireline Drill Rods
RP635
Series Rods
SCX RP635 rods are manufactured using variable wall material and feature the industry standard modified ACME thread on the box and pin ends with the appropriate stand-off gap to ensure a tight seal.
Standard R Wireline Drill Rods
RP640
Series Rods
The SCX RP640 Series “R” wireline drill rods feature an industry-proven thread form that has proven itself time and time again as a quality thread that will meet all of your requirements for deep hole drilling applications.
Heavy Duty Wireline Drill Rods
RP625
Series Rods
SCX RP625 rods feature an industry-proven buttress thread that has proven itself time and again as a quality thread that will meet all of your requirements for deep hole drilling applications.
Diamond Bits
SCX Series
Impregnated Diamond Coring Bits
In an impregnated drill bit, synthetic diamonds are embedded in a composite metal crown called a matrix.
SCX Series
Reaming Shells
The reaming shell is the component of a drill string used to maintain the correct gauge of the hole. It features a ring around the outer diameter which contains diamonds and TSP inserts.
SCX Series
Casing Shoes
Casing shoes are used at the end of a casing string, in place of an actual bit. Typically, they’re only required to drill through overburden, so their composition is much simpler and therefore less expensive.
SCX Canada
Corporate Head Office
(Miramichi, New Brunswick)
Worldwide Manufacturing / Sales / Service / Parts
SCX Australia
Corporate Head Office
(Darch, Perth)
Worldwide Sales /
Service / Parts
SCX Finland
Corporate Head Office
(Pirkkala)
Worldwide Sales /
Service / Parts
Locate a
Distributor
Locate a Distributor
Our gear goes where you need it, supported by a growing distributor network we trust. That means local service, faster support, and people who know your ground.
